Thermo*Systems

Exterior Examples | Envelop Mouldings | Utility Trim  | Spa Elements(tm) |

Low Maintenance Cellular Vinyl

Before Thermo Stop III
Before using Non PVC Parts


After using all PVC Parts from Royal Moulding


Garage Door System is a maintenance free Cellular vinyl product group which totally eliminates the problems of wood and metal systems. The program consists of four profiles:
  • Thermo*Stop®II
  • Brick Mould
  • Jamb
  • Back band
 

Each piece is carefully designed to work closely with the others to insure ideal appearance with energy efficiency and virtually no maintenance. Each profile is available in the standard garage door colors: white, brown, sandstone and bronzetone to coordinate with your garage door.
 

  • Will not Crack, Peel or Splinter
  • Absorbs No Moisture
  • No Rot ®
  • High Energy Efficiency
  • Nail, Screw, Glue for Installation
  •  

     

Colors available:

      Brown

      White

      Sandstone

      Bronze tone

Available Today at these fine Retailers:

Installation Instructions:
  1. Apply Garage door mouldings piece to area
  2. Use 4d to 6d coated Galvanized finish nail.
  3. Place nail at 12" to 16" on center. Nails should be approximately 3/4" from each edge.
  4. NOTE: If nailing product at 40 degrees F. or below pre drilling is required.
     

  5. If fillers are necessary follow manufacturer's instructions.
  6.  

    NOTE: Solvent based fillers should not be used.

  Royal Mouldings Limited

135 Bear Creek Road    P.O. Box 610    Marion, VA 24354

Phone: (800) 368-3117  Fax: (276) 782-3292

Email: info@royalmouldings.com

 

Copyright©1999 - 2006 All Rights Reserved.

Royal Mouldings Limited

A Member of the Royal Group of Companies