|
|
Quick
Trim
 |
A
Radius Component System for Specialty
Windows
|
Quick
Trim®
Benefits
Quick Trim®
Components
|
- No
Rot tm
- never
warps cracks or splits
- 10
year factory finish warranty saves
finishing labor
- Superior
"R" and "U" values .
- Ideal
for any climate and condition
- Can
be easily painted
- Resists
moisture absorption.
- Eliminates
call backs
|
|
| "We
call the Royal Quick Trim®
Bendable Window Component System a
technological breakthrough, You'll call it a time
and money saver!"
Faster
window assembly...Saves labor...No
builder/contractor call backs for rot and
performance replacement.
Affordable
geometric beauty from ellipse to oval...The beauty
of line art for replacement and new construction. |
With Quick Trim®
components you can saw, nail, drill
or route. |
Quick
Trimtm has all the natural
characteristics of wood without the natural short
comings:
No
peeling
*
No
Rot ®
*
No
splintering
*
High
Energy efficiency
*
Will
not absorb moisture
*
Enhances.screw
holding power
* |
Click Here
for a complete assortment of matching Interior profiles.
 |
Quick Trim®
System Grill Options
- Interior Grills - Available with stainable
Clearwood®, painted interior surfaces or solid
colors. Each with a cap stock to the exterior
side to control thermal expansion.
- Exterior Grills - Cap stocked for superior UV
and weatherability characteristics, available in
solid colors
- Internal Muntins (Grill between glass) -
Interiors with prefinished woodgrains or solid
colors and cap stocked exteriors.
Physical Properties
Flex Modulus: 170,000 psi @RT
Coefficient of Expansion: 0.000018
in/in-F
Oven Shrink: 0.02% @TEMP: 240F
End Use Temp. Range: <240F |
The perfect round top window design is
attractive, versatile, durable, cost-effective, easy to
install, maintenance free, and energy efficient. The
Perfect round-top window choice is Quick Trim®.
THERMAL PROPERTIES CHART:
- U Value - The Lower the Number the Better the
Insulator
- R Value - The Higher the Number the Better the
Insulator
To follow is a comparison of thermal properties of some of
the more common materials used in building windows. This
information was retrieved from several different sources;
therefore the accuracy may vary somewhat.
The two most common units used to evaluate
thermal properties are U-value and R-value.
The U-value is defined as the amount of conductive
heat energy (BTU's) transferred through a one square foot
area For each 1° temperature difference between the
indoor and outdoor air. Units are BTU/hr/ft²/degreeF.
The lower the number the better the insulator.
The R-value is just a different way
of looking at the same concept. TheR-value is the
reciprocal of the U-value. R measures the ability
of a given material (barrier) to resist the transfer of
heat through a one square foot area for each 1°
temperature difference. Units are Hr/ft²/degreeF/BTU.
Both units are per inch of thickness. The higher the
number the better the insulator.
| MATERIAL |
U-VALUE |
R-VALUE |
|
| White Pine* |
.78 |
1.3 |
*CRC Handbook of chemistry and Physics |
| Rigid PVC^ |
1.02-1.45 |
.69-.98 |
Modern Plastics Encyclopedia |
| Cellular PVC+ |
.48 |
2.1 |
+Actual test data |
| Aluminum* |
1642 |
.00061 |
|
*Please note that density, moisture content, etc.
can have a substantial effect on the above results
Technical Support:
Bending:
Type of Heat:
Convection Heat Preferred or Any Consistent Uniform
Heat
HOT OIL IS NOT
RECOMMENDED! |
Finishing:
Finishes recommended for use by manufacturers or
consumers on Clearwood:
Standard Oil Base
Latex
Polyurethane
Do Not Use
Solvents or Hot Oil Bath! |
| Recommended Time: AT 300°F |
Touch ups
and Fillers: |
| 5/8 x 5/8 Stop |
2 MINUTES |
| 13/4 x 5/8 Stop |
4 MINUTES |
| Jamb |
6 MINUTES |
| Casing |
5.5 MINUTES |
| Brick Mould |
15 MINUTES |
|
- Touch Up Kits are available for Clearwood.
- Use A Hair Dryer for dents and dings on the
extruded profile.
- Putty Pencil is recommended for a hole filler
after staining and topcoat.
|
Joining:
- PVC to PVC
Screws or PVC Cement
- PVC to Wood
Screws (Use Drywall screws w/large thread or
flute).
|
|
